Media Blasting & Powder Coating

Powder Coating

Welcome to Speedy’s

JR Sims ~ Service Manager

JR Sims ~ Plant Manager

 

When you call or come in to Speedy’s Industrial Coatings, you will communicate mostly with JR Sims. JR is the Plant Manager and Powder Coating professional and can help you will all of your industrial, commercial, hobby projects,  as well as auto and sports projects.

 

 

 

 

Kelly Jordan ~ Owner

Kelly Jordan ~ Owner

 

 

Our mission is to have a speedy turn around for all of your Powder Coating needs, no matter how big or small. We are committed to quality, proficiency and customer service.

Powder Coating Process

Powder coating is much different from painting because there are no liquids or solvents. Therefore, it is the best coating for environmental friendliness. The powder over-spray has very high application efficiency because it is dry. The powder is converted from a powder to a continuous film by using heat on it.  The powder coating materials are basically plastics that are ground into a fine powder. The coating powder is formulated with pigments, plastic resins, flow agents and other special ingredients to provide the preferred characteristics of the coating film.

Typical steps in the powder coating process for metal parts:

  • Cleaning – the purpose is to remove grease, oils, polishing compound, wax, particulates, and light oxides from the surfaces of the part .
  • Rinsing – This step is critical in the metal finishing process
  • Phosphating (optional step to improve adhesion and corrosion protection) – Provides improved powder coating adhesion and acts as a corrosion barrier.
  • Drying – High pressure blowers, air drying: high velocity air, heated air, combination of hot and high velocity air, and infrared drying
  • Powder Coating
  • Curing -The thermostat powder begins to melt, flows out, and then chemically reacts to form a higher molecular weight polymer in a network-like structure when it is exposed to elevated temperatures.

Powder Coating Advantages

Powder Coating Advantages over liquid coatings:

  • EPA friendly – it does not release hazardous VOC into the air and atmosphere like liquid finishes do.
  • More attractive, tough, durable, cost-effective finish, and resistant to abrasion, corrosion and scratching.
  • Lower rejection rates – no running, dripping – it is a dry process so it sticks efficiently and effectively.
  • Color selection is virtually unlimited and Less fading

Powder Coating Aluminum Rail

The powder coating process is very similar to a regular painting process except that the “paint” is a dry powder instead of a liquid. The powder sticks to the parts due to the grounding of the parts and electrostatic charging of the powder. Any substrate that can tolerate the heat of curing the powder and that can be electrically grounded to enhance charged particle attachment can be used. The powder flows and cures during the heating process.